Ventiladores Axiales EC (Modelo: AKFG)
Características
- caudales de hasta 32.000 m³/h
- tamaño: 560 - 1000 mm (Diametro de aspas)
- tecnologia altamente eficiente EC
- sistema de control integrado (controlador EC)
- velocidad 100% infinitamnete variable
» Descargas y Diseño
Properties
Sickle formed profiled impellers made of cast aluminium result in a very low noise spectrum. The main concern was to keep noise emission low in the main range of application of the fan, while having an optimal performance curve with the long and short inlet cones.
Caja de contacto
Sirve como protección contra contacto y para montar el ventilador en el cono de entrada..
Inlet cones
External dimensions according to customer requirements. If necessary, please submit a drawing.
Descargas
Ventiladores axiales (Modelo: AKFD)
Características
- flow rates up to 24,000 m³/h
- size: 560 - 1000 mm (impeller diameter)
- asynchronous external rotor motor
- sickle formed profiled impellers made of cast aluminium
- terminal box design; alternatively, lateral or axial cable outlet
- protection class IP54, thermal class F
» Diseño y Descargas
Properties
Sickle formed profiled impellers made of cast aluminium result in a very low noise spectrum. The main concern was to keep noise emission low in the main range of application of the fan, while having an optimal performance curve with the long and short inlet cones.
Guard
Serves as contact protection and for mounting the fan onto the inlet cone.
Inlet cones
External dimensions according to customer requirements. If necessary, please submit a drawing.
Descargas
Axial fans (Type: AKSE / AKSD)
Características
- flow rates up to 28,000 m³/h
- size: 315 - 900 mm (impeller diameter)
- asynchronous external rotor motor
- sickle-shaped impellers
- terminal box design; alternatively, lateral or axial cable outlet
- protection class IP54, thermal class F
» Diseño y Descargas
Properties
Sickle formed axial impellers result in a very low noise spectrum. The main concern was to keep noise emission low in the main range of application of the fan, while having an optimal performance curve with the long and short inlet cones. The impellers are designed as follows:
- size from 350 to 450
- made of sheet steel
- size from 450N to 630
- of aluminium sheet
- size from 710 to 1000
- of profiled cast aluminium impellers
Guard
Serving as contact protection and for mounting the fan onto the inlet cone.
Inlet cones
External dimensions according to customer requirements. If necessary, please submit a drawing.
Descargas
Axial fans (Type: ER/DR and EQ/DQ)
Caracteristicas
- flow rates up to 34,000 m³/h
- size: 200 - 1000 mm (impeller diameter)
- asynchronous external rotor motor
- small depth
- universally usable in all installation positions
- speed is variable using auto transformers
» Diseño y descargas
Cubierta
The casings of the high-performance axial fans are manufactured from galvanised sheet steel and get an electrostatically applied powder plastic coating.
- model EQ/DQ:
- with square wall plate
- model ER/DR:
- pipe sleeve with double-sided standard flange for pipe installation
Aspas
The high-performance axial fans have aerodynamically shaped blades:
- size from 200 to 300
- made of painted and galvanised steel sheet
- size from 315 to 630-6
- made of plastic
- size from 630-4 to 1000
- made of die-cast aluminium
The impellers or blades are mounted directly on the rotor of the external rotor motors and are balanced dynamically together with the rotor according to quality level G 2.5 as per DIN1940.
Motores
- size from 200 to 300
- motor protection class IP44
- size from 315 to 1000
- motor protection class IP54
External rotor motors are used with moisture protection, with built-in ball bearings, and are designed with thermal overload protection. The drive by the external rotor motor provides a space-saving, compact and attractive design. The motor sits inside the impeller and is thus optimally cooled. For this reason, a 100% variable speed control can be guaranteed. Only well-dimensioned ball-bearings, fitted on both sides and with a long-life lubricant, are used. Both ball-bearing seats are ground to high precision in one work step to eliminate any vibration. External rotor motors are also characterised by an extremely low starting current. The windings comply with thermal class F. In addition, the windings have standard moisture impregnation.
Electrical connection
Los motores están equipados con un cable de salida. La conexión eléctrica se realiza a través de una caja de conexiones IP44 que se suministra suelta.
Descargas
Axial flow fans (Type: AND / ANDB)
Características
- flow rates up to 85,000 m³/h
- AND - size: 400 - 710 mm (impeller diameter)
- ANDB - size: 560 - 1000 mm (impeller diameter)
- IEC standard motors as drive
- vertical and horizontal installation possible
- options for varying hub ratio, number of blades and blade angle
» Desiño y Descargas
Cubieta
The casings are available as galvanised sheet steel as a standard feature. If desired, the casing can also be provided as plastic coated. The casing can be equipped with an inspection door. In the long version L, the motor and the impeller are covered by the casing length; in the shorter version K, however, the motor extends beyond the casing. The casing with defined flange hole pattern (slots for different bolt circle diameters) ensures an easy connection to the pipe system.
Motores
Drive motors three phase IEC motors model B3 protection class IP55 type with class F 2, 4, 6 or 8-pole. On request, multi-speed motors can be supplied with 2 or 3 speeds.
Aspas
Impellers, wings and hubs made of die-cast aluminium, with aerodynamically optimised profiles to achieve high efficiency and low noise. The profile angles can be adjusted at rest to obtain the required operating point.
- model - AND
- for sizes 400-710, the hub is fitted with 5 or 10 blades depending on the power requirement ; for sizes 500, 630 and 710, 7 or 14 addition blades are used.
- model - ANDB
- for sizes 560-800, the hub is fitted with 6 or 9 blades depending on the power requirement ; for sizes 900 and 1000, 5 or 10 addition blades are used.
Conexion electrica
Descargas
Operating manual: Axial fans with IEC standard motor (BA029+BA030)
formato de archivo: .pdf
tamano del fichero: 372.58 kB